-
One of our clients in Philippines contacted us for help to solve corrosion and abrasion problems for existing ball valves used in mining projects. The corrosive and abrasive mining slurry with solids is about to be disposed to the tailing's dam and the important metals are already extracted. The slu...
-
There are many high pressure safety valves installed in our client's copper refinery in Philippines. They are installed for the acid exhaust-heat boiler, CF circular water boiler, auxiliary boiler drum, low pressure steam receiver, acid plant drum and air receiver tank etc. According to the wor...
-
Our client in Philippines has a cooper refinery built near the sea. They pump the seawater to meet water demand during copper refinery. They need to replace the old butterfly valves during shutdown. We visited our client and went to the copper refinery to check the working conditions at site. After ...
-
Our client is an agricultural company farming more than 2000 hectare under irrigation. They are building a hydro turbine facility to generate electricity and need the hydraulic slow closing butterfly valves for the hydro turbines and pumps. According to the layout of the turbine room as below, we de...
-
The 150#RF YFL balanced bellows safety valves with inlet 8'' and outlet 10'' are designed for abrasive mining slurry in Australia. The working condition is as follows: 1. Densitiy: 1.3 to 1.5 2. Operating pressure:1100KPA 3. Relif pressure is 1400KPA 4. Temperature: 42℃ 5. Abrasive slurry with solid...
-
The 150#RF 3'' pneumatic ceramic O-port ball valves are designed for Glencore to solve abrasion and corrosion problems in Nickel hydrometallurgical process. The abrasive and corrosive process specifications are as follows: 1. Temperature: 140 deg C (Max. at 150°C when the evaporator shut off); 2. Co...
-
After successful sample test, Glencore have placed many repeated orders of our PN16 DN25/DN50 ceramic V-port ball valves to solve abrasion and corrosion problems in Nickel refinery. These ceramic V-port ball valves are used for the abraisve and cororisve slurry as follow: 1. Water and H2O2 based slu...
-
The PN16 DN100 Ceramic V-Port Ball Valves are customized to solve abrasion and corrosion problems in Glencore Nickel purification & electrowinning process. The Ceramic V-Port Ball Valves are used to regulate the abrasive slurry precisely. Our customer Glencore have tested many products in the ab...
-
The 150#RF 1'' full bore ceramic V-notch ball valves are used to regulate the abrasive Alumina slurry accurately in production of Autocatalyst. The abrasive working conditions in Umicore Autocatlayst production are as follow: 1. Pressure: 120 psi 2. Temperature: 60℃ 3. Medium: abrasive Alumina...
-
The ceramic double disc gate valves are used for abrasive alumina powder to solve abrasion problems. The ceramic double disc gate valve is installed horizontally at the bottom of a cyclone, and the alumina powder is falling down to the bottom of the cyclone. The flow rate is 400kgs per day and the v...
-
YFL pneumatic ceramic knife gate valves and manual ceramic knife gate valves have been installed in a new line limestone piping during client's last overhaul in May. These ceramic knife gate valves are an integral part of the pipeline for transport limestone from silo to boiler furnace in Thermal Po...
-
Ceramic V-port ball valves as regulating control valves and Ceramic O-port ball valves as on/off valves are all used for abrasive Silicon powder in Polysilicon industry to solve abrasion problems to extend the working life, save maintenance cost and reduce shutdown loss. The Silicon powder is v...
